Park Pilot EP ARF/RTF - (HCAA1997/2003)
Tech Notice

On page 9 of the Park Pilot manual it says that the servo reversing switches should be in the REVERSE (REV) position for both CH 1 and CH 2. For this version of the Park Pilot your servo reversing switches should be in the NORMAL (NOR) positions for both Ch 1 and Ch 2. Please check this on your TX (transmitter) before flying the plane. If you change your servos or radio equipment please check the manufacturer's instructions for proper setup.

Hobbico - E-Bulletin

E-Bulletin

Enter your e-mail address



You must be 13 or older

Privacy Policy