Smaller, lighter...and dual settings!
The VoltWatch2 is great for R/C airplane pilots — AND heli or car modelers using 5-cell packs!
- Features an on-board selector switch that allows the unit to be used with either 4.8V or 6.0V NiCd or NiMH receiver batteries.
- Seven LEDs (4 green for "safe", 2 amber for "caution", 1 red for "low") glow one at a time to quickly and accurately show the battery's unloaded voltage.
- Smaller and lighter than the original VoltWatch, with a very low current draw (4mA to 34mA).
- Comes with a universal radio connector, and connects to any open receiver port.
Pilots simply mount the VoltWatch2 anywhere the 7 tiny status lights can be seen.
At only 1/6" thick, and weighing only 1/6 of an ounce, the VoltWatch2 can be mounted almost anywhere, on any size plane.
|Case Size:||1.65 x 0.63 x 0.16 in (42 x 16 x 4 mm)|
|Weight:||0.15 oz (4.3 g)|